Colorbond Roof Restoration & Repair Melbourne

Colorbond is a great roof, but nothing lasts forever. Over the years the factory coating breaks down, the colour fades and chalks, and once the surface is exposed the metal starts to rust, especially around screws and laps. On a recent Glen Waverley job the protective coating had broken down and left the roof exposed, so we pressure washed it back, treated the rust, primed it and put two coats of colour membrane on. Good as new, without the cost of a new roof.

• Faded, chalky or patchy colour

• Surface rust, especially around screws and seams

• Leaking or loose roofing screws

• Failed sealant at laps and penetrations

• A roof that just looks tired and old

We treat metal roofs differently to tile, because they need the right prep to hold a coating:

1. Pressure wash the roof with our Jetblaster 3,500 PSI system to strip off loose coating and dirt

2. Treat and prime any rust with a rust converter and metal primer

3. Replace or reseal leaking screws and laps

4. Apply two coats of protective colour membrane in your chosen colour

The result is a sealed, re-coloured roof backed by our 10-year product guarantee and 7-year workmanship warranty. If a section is too far gone, we can repair or replace just that part rather than the whole roof.

Re-coating is a great chance to update the look of your home. We can match your existing colour or change it entirely, and a lighter colour can help keep the house cooler in a Melbourne summer. Tell me the look you are after and I'll help you pick a colour that suits the house and the street.