Pressure Cleaning & Washing
- Home
- Pressure Cleaning & Washing
Pressure Washing In Melbourne
Your home or commercial property is constantly exposed to Melbourne’s changing weather – rain, dust, traffic pollution, shade, mould, bird droppings and everyday wear. Over time, surfaces gradually darken, stain, and become slippery – often without you noticing until it looks tired and neglected.
Professional pressure cleaning in Melbourne restores surfaces safely and effectively.
Using purpose-built equipment and controlled water pressure, we lift dirt, mould, algae, grease and pollutants from concrete, brick, pavers, render, timber, roofs and more – revealing a cleaner, brighter finish underneath.
The result isn’t just cosmetic.
A properly cleaned surface:
- Reduces slip hazards
- Prevents premature deterioration
- Stops mould from spreading into walls
- Improves property value and street appeal
- Makes ongoing maintenance easier
Whether you are preparing to sell, renovating, leasing out a property, or simply want everything looking fresh again – our high pressure cleaning services deliver results you can see immediately.
For Better Service
We work cleanly, safely and efficiently – and we explain every step so you know exactly what’s being done.
Your Shortcut to a Clean and Well-Maintained Property.
Cleaning large outdoor surfaces isn’t as simple as grabbing a garden hose. Oil, mildew, traffic grime, tannin stains from trees and stubborn dirt bond deeply into pores. Scrubbing rarely works – and using the wrong pressure or harsh chemicals can cause permanent damage.
Our team carefully assesses every area before cleaning.
We consider:
- Surface type (concrete, brick, render, stone, tile, timber, Colorbond, etc.)
- Age and previous coatings
- Level of staining
- Surrounding drainage and water flow
- Nearby gardens and landscaping
Then we choose the safest technique – from gentle soft-washing to deep power washing – ensuring surfaces are restored without cracking, etching or stripping. The outcome is a property that looks cared-for, healthier and ready for everyday use again.
About Pressure Cleaning
Pressure cleaning (also known as pressure washing or power washing) uses pressurised water to dislodge stubborn build-up.
But it’s not just “high pressure”.
Professional pressure cleaning involves:
- Controlled pressure based on material strength
- Specialist nozzles for different finishes
- Eco-friendly detergents where necessary
- Correct washing direction to avoid water penetration
- Protective rinsing around plants and fixtures
Used incorrectly, DIY pressure washing can:
- Carve lines into concrete
- Damage mortar between bricks
- Strip paint from walls and fences
- Push water into roof cavities and eaves
- Cause leaks or mould inside the home
That’s why choosing an experienced pressure washing company matters. We clean thoroughly – without risking the structure beneath.
Our Pressure Cleaning Services In Melbourne
We provide complete pressure and power washing services for residential, commercial and industrial properties across Melbourne.
Typical areas we clean include:
✅Outdoor hard surfaces
- Driveways and garages
- Footpaths and walkways
- Patios and outdoor entertainment areas
- Pavers, concrete and exposed aggregate
- Pool surrounds
✅Building exteriors
- Brick, render and cladding
- Fences and retaining walls
- Boundary walls and entrances
- Shop fronts and facades
✅Roofs & additional areas
- Roof washing (low-pressure, safe methods where appropriate)
- Solar panel cleaning
- Pergolas and decking
- Car parks and loading bays
- Warehouse floors and factory areas
From single homes to apartment complexes and commercial sites – we tailor our approach to each property.
Melbourne Pressure Cleaning Specialists
If you are looking for a reliable pressure washing company in Melbourne, our team delivers professional pressure washing services and high pressure cleaning services tailored to each surface. We also provide power washing services for commercial and industrial sites, operating as a fully insured power washing company with experience across a wide range of properties.
Melbourne’s conditions create the perfect environment for stains and moss growth – especially in shaded, damp areas.
We understand local challenges such as:
- Mould developing in south-facing areas
- Slippery green algae on shaded concrete
- Black mildew caused by humidity
- Rust stains from metal fittings
- Tree sap and tannin staining pavements
- Oil and fuel residue on driveways
Our experience means we know how to treat each issue safely – often restoring surfaces to near-new condition.
We don’t just make surfaces look clean – we make them safer and longer-lasting.
If you’ve searched for a reliable power washing company in Melbourne, you deserve a team that is punctual, careful, insured and detail-focused – and that’s exactly how we work.
Get a Free Pressure Cleaning Quote
Every cleaning job is different – and we believe in transparent pricing.
When you contact us:
We discuss what needs cleaning
inspect the area (photos or onsite)
recommend the best cleaning method
provide a no-obligation quote
schedule a time that suits you
No hidden charges. No rushed work. Just honest advice and quality results.
If you want your home, business or outdoor surfaces looking fresh again, professional pressure washing in Melbourne is one of the fastest ways to transform a property.
Get a free pressure cleaning quote today – and see the difference professional high-pressure cleaning makes.
- FAQ's
Frequently Asked & Questions
Most Melbourne homes benefit from pressure washing once a year. Properties near trees, busy roads, or coastal areas may need cleaning every 6–9 months to prevent mold, grime and staining.
Not when it’s done correctly. We adjust pressure levels, use the right nozzles, and apply gentle cleaning methods where needed to protect paint, render, timber and delicate finishes.
Yes – but only when done using controlled, low-pressure methods. We avoid forcing water under tiles or sheets and use techniques designed specifically for roof surfaces.
Most oil stains can be significantly lightened or removed using specialist degreasers and hot water treatment – but results depend on how long the stain has been there.
Pressure washing uses high-pressure water, while power washing often combines pressure with heated water for heavy grease, oil and industrial grime. We choose the right method based on the surface and stain.
Small areas like driveways may take 1–2 hours. Larger properties or multiple surfaces may take half a day or more. We’ll let you know the expected timeframe before starting.
Absolutely. We service homes, shops, schools, warehouses, strata complexes and more – including after-hours cleaning where required.
Cost depends on the area size, level of staining, access and water requirements. We’re happy to provide a clear, no-obligation quote after we assess the job.
Trusted by Melbourne homeowners for honest, reliable roof restorations.
Your home deserves quality workmanship that lasts for years to come.
